Aquatec AF-100 Scuba Guardian Air Filter

US$35

SKU: AF-100 Categories: , Brand:

Description

AF-100 Scuba Guardian Air Filter

Scuba Guardian Air Filter, Scuba Accessories, Dive Gear Accessories, Scuba Gear Accessories, Diving Equipment Regulator Accessories

The Aquatec Scuba Guardian Air Filter was designed to cleanse high pressure compressed air for use by scuba divers. The system is easy to install and maintain. The Guardian Air Filter is only for recreational air diving use to depths not in excess of 130 feet of seawater/ 40 meters. Do not use the Guardian air Filter with enriched air nitrox or for any other mixed gas diving.

Installation Instructions:
Step 1: Disconnect the Regulator hose from the first stage of your regulator.
Step 2: Carefully, thread the Guardian Air Filter First Stage Body Joint into the low pressure port where the regulator hose was connected to the first stage.
Step 3: Tighten the First Stage Body Joint to 5.16 foot pounds/ 7 newton meters. If you do not have access to a torque wrench, tighten only until snug. Do not over tighten First Stage Body Joint

Scuba Gear Technical Information:

Clean Air System.
The Aquate Guardian Air Filter was designed to cleanse high pressure compressed air for use by scuba divers. The system is easy to install and maintain. The Guardian Air Filter is only for recreational air diving use to depths not in excess of 130 feet of seawater/ 40 meters. Do not use the Guardian Air Filter with enriched air Nitrox or for any other mixed gas diving.
⊙ Diving Equipment OEM & ODM available.
⊙ Diving Equipment customization.
⊙ Manufactured by: Aquatec

Maintenance

After each use, must be rinsed with fresh water.